User Manual

Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
36
 Host Name - Enter the Domain name you want to set.
 IP Address – Display the WAN IP address.
Click the Save button to save your settings.
5.3.5 Advanced Routing
Choose “Advanced  Network  Advanced Routing”, you can view all the current groups on
this page.
Figure 5-13
 RIP Authentication – Check the box to enable the RIP Authentication function.
 Authentication Key – Create a key（up to 16 characters）for the RIP authentication.
 Authentication Key ID - Create a ID（up to 3 characters） for identity a authentication key.
 Reporting Interval – Refer to the update interval for routing information.
 Destination IP Address –The Destination IP Address is the address of the network or host
that you want to assign to a static route.
 Destination IP Subnet Mask –The Destination IP Subnet Mask determines which portion
of an IP Address is the network portion, and which portion is the host portion.
Click Save button to save the settings.