User Manual
Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
8
Step 2: Wait for about 1 minute until the following LEDs are solid on.
Step 3: Connect your computer to the modem router via a wired or wireless connection.
Wired: Connect the computer to the modem router’s LAN port via an Ethernet cable.
Wireless: On your computer, select and connect to the modem router’s wireless network.
The default wireless network name (SSID) and password are printed on the product label
at the bottom of the modem router.
Or you can set up a connection via the WPS button, which is on the back panel of the
modem router. For more information about WPS, refer to 5.4.2 Primary Network
.
2.4 Activate the Modem Router
Step 1: Get your Internet service account information and the modem router’s product label ready
for activating your modem router. To access the Internet, the modem router needs to be
activated.
MAC:XX-XX-XX-XX-XX-XX
Wireless Password/PIN:XXXXXXXXX
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G
Model:Archer CR700 ver:1.0
S/N:XXXXXXXXXXXXX
Serial Number
MAC Address
SSID
Wi-Fi Password/PIN
Figure 2-2
Step 2: If your computer is configured with a fixed IP, change it to “obtain an IP address
dynamically”.
Launch a web browser, and visit any website. You will be automatically redirected to your
service provider’s self-activation page.
Follow the on-screen self-activation instructions to activate the modem router. If the
self-activation page does not show up, please call your service provider’s customer
service to activate the modem router.
Note:
For Comcast and Time Warner Cable (TWC):
Comcast Xfinity 1-800-934-6489 www.comcast.com
Time Warner Cable 1-855-704-4503 www.timewarnercable.com
The contact information listed might change. You can also find the contact number in your monthly
Internet service billing statement.
2.5 Enjoy the Internet
After activating your modem router successfully, wait for about 10 minutes till these LEDs
become solid on, then you can enjoy the Internet.