User Guide

Chapter 14

Manage the Router

2. Select the correct Start date and time when daylight saving time starts at your local

time zone.

3. Select the correct End date and time when daylight saving time ends at your local

time zone.

4. Click Save.

14. 2. Control LEDs

The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the

LEDs either from the web management page or by pressing the LED button.

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to Advanced > System Tools > LED Control.

3. Tick the Night Mode checkbox.

4. Specify a time period in the LED Off Time as needed, and the LEDs will be off during

this period.

5. Click Save.

14. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other

network devices.

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to Advanced > System Tools > Diagnostics.