User's Manual

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
- 81 -
z In Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.
z In Host field, select Host_1.
z In Target field, select Target_1.
z In Schedule field, select Schedule_1.
z In Action field, select Allow.
z In Status field, select Enabled.
z Click Save to complete the settings.
Then you will go back to the Access Restriction Rule Management page and see the following list.
Figure 4-59 Rule Settings
4.13.2 Host
Choose menu “Access Control → Host”, you can view and set a Host list in the screen as
shown in Figure 4-60. The host list is necessary for the
Access Restriction Rule.
Figure 4-60 Host Settings
¾
Host Description - Here displays the description of the host and this description is unique.
¾ Information - Here displays the information about the host. It can be IP or MAC.
¾ Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New… button.
2. In the Mode field, select IP Address or MAC Address.
z If you select IP Address, the screen shown is Figure 4-61.
1) In Host Description field, create a unique description for the host (e.g. Host_1).