User's Manual

TL-WR710N WiFi Pocket Router/AP/TV Adapter/Repeater
- 112 -
5.5 Working Mode
The Router supports five operation mode types: Wireless Router, Access Point, Repeater,
Client and Wireless Client Router. Please select one you want. Click Save to save your choice,
which is shown as Figure 5-7.
Figure 5-7 Wireless Working Mode Settings
¾ Wireless Router - The wireless Router Mode. In this mode, the device enables multi-user to
share Internet via DSL/Cable Modem. The only wired port works as WAN.
¾ Access Point - The wireless access point mode.
¾ Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
¾ Client - The Client Mode. The computer connected by Ethernet could get access to an AP by
Client mode.
¾ WISP Client Router - In this mode, the device enables multiple users to share Internet
connection from WISP.
5.6 Network
Figure 5-8 the Network menu
There is only one submenu under the Network menu (shown in Figure 5-8): LAN.
5.6.1 LAN
Choose menu “Network → LAN”, and then you can configure the IP parameters of the LAN on
the screen as below.