Installation Guide JetStream TXM431 Transceiver Series SFP+
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
CONTENTS Chapter 1 1.1 1.2 Overview ..................................................................... 1 Features ...................................................................... 1 Chapter 2 2.1 2.2 2.3 Introduction ........................................................ 1 Installation .......................................................... 2 Installing the SFP+ Transceiver .................................. 2 Removing the SFP+ Transceiver ................................
Chapter 1 Introduction 1.1 Overview TP-LINK’s JetStream Series SFP+ Transceiver contains two types of transceivers: TXM431-SR and TXM431-LR. Both transceivers support 10G Ethernet, making them very suitable for business needs. TXM431-SR uses 850nm wavelength, it supports maximum transfer distance of 300 meters, while TXM431-LR uses 1310nm wavelength, with its maximum transmission distance reaching as far as 10 km, providing customers with a very flexible choice when deploying their 10G Ethernet connection.
Duplex mode supported Hot-swappable Chapter 2 Installation 2.1 Installing the SFP+ Transceiver Note: Installing or removing the SFP+ transceiver with fiber-optic cables still attached to it may damage cables and cable connectors. Please disconnect all cables before removing or installing an SFP+ transceiver. Remove and insert SFP+ transceiver if necessary. Removing and installing an SFP+ transceiver frequently can shorten its service life.
SFP+ Figure 2 Step 4: Remove the dust plug from the transceiver. Note: Always keep the protective dust plug on the SFP+ transceiver’s optical bores until you are ready to make a connection. Step 5: Plug fiber into the transceiver and the SFP+ transceiver can now begin operation automatically. 2.2 Removing the SFP+ Transceiver Step 1: Wear an ESD-preventive wrist strap, and make sure the wrist strap has good skin contact and is well grounded.
Figure 3 2.3 Safety of Laser Use JetStream TXM431 Series SFP+ Transceiver is a Class-1 laser device. Do not look straight at the optical port of the transceiver when it is operating. The optical fiber beam is of high energy and thus will do great harm to the retina. Note: Looking straight at the optical fiber beam could do great harm to your eyes.
Appendix: Specifications Standards Safety & Emissions Power supply Operating Temp Storage Temp Operating Humidity Storage Humidity IEEE 802.
Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/download For all other technical support, please contact us by using the following details: Global Tel: +86 755 2650 4400 Fee: Depending on rate of different carriers, IDD. E-mail: support@tp-link.com Service time: 24hrs, 7 days a week USA/Canada Toll Free: +1 866 225 8139 E-mail: support.usa@tp-link.
7106504478 REV1.0.
