Download

Quick Installation Guide

1. Set up the Modem Router

AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router

VR600v

2. Connect the Phone

Open the registration page on your cordless phone. Press and hold the DECT

button on the modem router for about 3 seconds until the Phone LED ashes.

Enter the PIN (Default: 0000) on the cordless phone if required.

Analog Phone

DECT Cordless Phone

DECT

Connect your analog phones to RJ11 ports on the modem router's back

panel. You may connect up to two.

Flashing

RJ-11

DECT

Within 1 minute Press for about 3 seconds

Ethernet Cable

Package Content

Antenna

Power Adapter

Modem Router

RJ11 Cable

DECTWLANWPSResetPower On/Off

DECTWi-FiWPSResetPower On/Off

DSLPhone2Phone1

Modem Router

Connect the modem router

to the DSL splitter.

For traditional landline phone service

Power Adapter

Connect the DSL splitter

to the phone jack.

DSL Splitter

Phone Jack

PHONE MODEM

LINE

Push in to turn on the

modem router.

Attach the antennas.

DSL Splitter

PHONE MODEM

LINE

PAGE 1
Package Content P H O N E M O D E M LIN E Power On/Off Reset WPS WLAN DECT Quick Installation Guide Antenna Modem Router DSL Splitter AC1600 Wireless Gigabit VoIP VDSL/ADSL Modem Router VR600v RJ11 Cable 1. Set up the Modem Router 1 Attach the antennas. Power Adapter Ethernet Cable Power Adapter 2. Connect the Phone Analog Phone Connect your analog phones to RJ11 ports on the modem router's back panel. You may connect up to two. RJ-11 3 Push in to turn on the modem router.
PAGE 2
3. Configure the Modem Router Before You Start Most internet service providers (ISPs) will provide a username and password for their service when you first sign up with them. If you are unsure, please check with your ISP. If you are using telephony function, you’ll need to register your phone number on the modem router. Please find your phone information before continuing. 1 Connect your network device to the modem router via a wired or wireless connection.