Download

42
Chapter 6 Telephony
4. Set the “No answer“ Time. A time period. If the call is not
answered within this time period, the caller can leave a voice
mail.
5. Choose greetings for your Voice Mail. You can record the
greeting by dialing *30 on the keyboard of your telephone.
6. Set how long a voice mail can last at Voice Mail Duration.
7. If you want to access your voice mail remotely, enable
Remote Access Voice Mail and create a new Remote Access
PIN to make this function available. You need to enter this
new PIN when listening to your voice mails remotely.
8. You can enable Push Notification via E-mail for Voice Mails
to have e-mail sent to you informing you of voice mails. You
should first go to Advanced > System Tools > Push Service
page to enable Push Notification via E-mail, and click to see
the help page for detailed configuration about Push Service.
9. If you have inserted a USB storage device, you can enable
Expand Storage Capacity with USB Storage Device to save
voice mails to your USB storage device after the internal
flash is full.
10. Click Save to make the settings effective.
When a voice mail is recorded, the modem router will display it
in the following table.
There are three ways to listen to these voice mails.
• Click on the table to listen.
• Press *20 on the telephone keyboard to listen.
• Dial the number of your telephone, press * when you hear the greeting
and follow the voice prompt to enter the Remote Access PIN to listen.
Done!