Download

90
Chapter 14 Specify Your Network Settings
devices I use for work whilst keeping all devices’ access to the
internet.
1. Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2. Go to Advanced > Network > Interface Grouping to open the
configuration page where some interfaces can be grouped
together. Click Add to create a group.
3. Name the group.
4. Check the boxes of LAN1 and LAN3 in Available LAN. Here
Wi-Fi 2.4G network and Wi-Fi 5G network are viewed as a
LAN interface respectively.
5. Click Enable Group Isolation to isolate working devices and
disallow other devices from communicating with them.
6. Click OK to save the settings.
Now your working devices connected to LAN1 and LAN3 are in
an isolated group!
Note: VLAN function is enabled by default. You cannot disable it when IPTV
is enabled.
14. 6. Create Static Routes
A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
How can I
do that?
Done!