Download

4
Chapter 1
LED Explanation
Name Status
Indication
Power
On The system has started up successfully.
Flashing
The system is starting up or firmware is being upgraded.
Do not disconnect or power off your modem router.
Off
Power is off. Please ensure that the power adapter is
connected correctly.
DSL
On DSL synchronization is complete.
Flashing DSL synchronization is in progress.
Off
DSL synchronization failed. Please refer to 1 for
troubleshooting.
Internet
On Internet service is available.
Orange
Internet connection is correct but internet service is
unavailable.
Off
Internet connection is incorrect or the modem router
is operating in Bridge mode. Please refer to 3 for
troubleshooting.
Wireless 2.4GHz
/
Wireless 5GHz
On The wireless 2.4GHz/5GHz band is working properly.
Off The wireless 2.4GHz/5GHz band is disabled.
LAN
On
At least one LAN port is connected to a powered-on
device.
Off No LAN port is connected to a powered-on device.
USB
On The USB device is ready to use.
Flashing The USB device is being identified.
Off No USB device is plugged into the USB port.
WPS
On
A wireless device has been successfully added to the
network by WPS.
Flashing
WPS handshaking is in process and will continue for
about 2 minutes. Please press the WPS button on other
wireless devices that you want to add to the network
while the LED is flashing.
Off
A wireless device has failed to be added to the network
by WPS.
Note:
1. If the DSL LED is off, please check your internet connection. Refer to Connect Your Modem Router for more information about
how to connect to the internet correctly. If you have already made a successful connection, please contact your ISP to make
sure your internet service is available now.
2. If the Internet LED is orange, please check your internet configuration. You may need to check this information with your ISP
and make sure everything has been input correctly.