Download
8
Chapter 2
2. 1. Position Your Modem Router
With the modem router, you can access your network from anywhere within the
wireless network coverage. However, the wireless signal strength and coverage varies
depending on the environment your modem router is in. Obstacles may limit the range
of the wireless signal, for example, concrete structures, thick walls.
For best Wi-Fi performance, and to keep your network secure:
• Do not locate the modem router in a place where it will be exposed to moisture or
excessive heat.
• Keep the product away from strong electromagnetic radiation and devices that emit
electromagnetic waves.
• Place the modem router in a location where it can be connected to the various devices
as well as to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
Tips: The modem router can be placed on a shelf or desktop.
2. 2. Connect Your Modem Router
Follow the steps below to connect your modem router.
1. Connect the DSL line and power adapter. The electrical outlet shall be installed
near the device and shall be easily accessible.
Phone Cable
Phone Jack
Power Adapter
Phone Cable
DSL Splitter
Phone (Optional)
Modem Router
2
Note: The DSL LED takes about 1 to 2 minutes to
stabilize.
Power On DSL On
3
If you don’t need the phone service, just directly connect the
modem router to the phone jack with the provided phone cable,
then follow steps 4 and 5 to complete the hardware connection.
Push in to turn on the
modem router.
Attach the antennas.
4
Verify that the following LEDs turn stable
before continuing with the conguration.
5
1
PHONE
LINE
MODEM