Download

Quick Installation Guide
AC1900 Wireless Dual Band Gigabit
VDSL/ADSL Modem Router
Connect the Hardware
Configure the Modem Router
Enjoy the Internet
Phone Jack Power Adapter
Phone Cable
VR900
PHONE
LINE
MODEM
Now you can enjoy your Internet.
If you want more advanced settings, please refer to the User Guide on TP-LINK official website at http://www.tp-link.com.
4 Push in to turn on the
modem router.
1 Attach the antennas.
Wired
Wireless
2
DSL Splitter
Phone (Optional)
5 Verify that the following LEDs are on and stable
before continuing with the configuration.
Notes:
Power On OnDSL
Ethernet Cable
Modem Router
1 Connecting your computer to the modem router via a wired or
wireless connection
Connect wirelessly by using the SSID
(network name) and Wireless
Password printed on the product label
at the bottom of the modem router.
2 Configuring the modem router via a web browser
http://tplinkmodem.net
HighMiddleLow
Save
Conrm Password
New Password
A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
Note: If the login page does not appear, please refer to FAQ->Q1.
C Select your Region and Time Zone, then click Next. Follow the step-by-step
instructions of the Quick Setup to complete the initial configuration.
B Enter the password you created and click Log in.
Note: For subsequent logins, you only need to enter the password that you have created.
LAN2DSL LAN3 LAN4/WAN Power
3
DSL USB1 USB2
LAN2 LAN3 LAN4/WAN Power
If you don’t need the phone service, just directly
connect the modem router to the phone jack with
the provided phone cable, then follow steps 3 and
4 to complete the hardware connection.
2. We recommends that the outside two antennas be
outward at about 30 degrees.
30° 30°
1. The DSL LED takes about 1 to 2 minutes to stabilize.