Download

Connect to a Computer
1 2
Install Driver and Utility
Insert the CD.
Browse the CD, go to Archer T9UH > Mac OS
X Driver, unzip the Mac OS X version.zip file
and run the Installer.
3
Join a Wireless Network
Option 1: Via TP-LINK Utility
Select the Available Network tab of the
pop-up utility window.
Select your Wi-Fi network and click Connect.
The connection status can be viewed on the
Link Status screen.
For Mac OS X
TP-LINK Wireless Configuration Utility
ProlesLink Status Available Network WPS Information
Associated SSID
34567_TEST
abcdef_0903
AAAAAA
BSSID
001018a95d8d
0051e1022044
021018010002
Network Type
Infrastructure
Infrastructure
Infrastructure
Encryption
WPA2-PSK AES
No Encryption
No Encryption
Channel
2
149
5
Refresh Connect
TP-LINK_A 721018010003Infrastructure WPA2-PSK AES6
Option 1: Directly Option 2: Via the USB Cradle
WPS
uninstall.commandInstaller.pkg
SHELL
Follow the wizard to complete the installation.
Option 2: Via Wi-Fi Protected Setup (WPS)
Press the WPS button on your router.
Within 2 minutes, press and hold the WPS button
on the adapter until the following screen appears.
When you are prompted “WPS Protocol Finished”,
click OK.
ProfilesLink Status Available Network WPS Information
SSID
34567_TEST
abcdef_0903
AAAAAA
BSSID
001018a95d8d
0051e1022044
021018010002
Security
WPA2-PSK AES
No Encryption
No Encryption
Channel
2
149
5
Refresh
TP-LINK_A 721018010003WPA2-PSK AES6
PBC
PIN
WPS Progress : Exchange WPS Message
3 sec
Cancel
TP-LINK Wireless Configuration Utility
Please key the PIN code into your AP’s config page
PIN: XXXXXXXX
b.
c.
©2016 TP-LINK
a.
a.
b.
b.
a.
c.
Note: You can also download the driver and
utility at www.tp-link.com.