Download

94
Chapter 13 Administrate Your Network
To enable remote management over HTTPS:
1. Enable Management over HTTPS and keep the Port for HTTPS as the default setting.
2. Leave the IP/MAC Address field blank. If you just want to allow a specific device to
manage the modem router, you can enter the IP address or MAC address of the
device in this field.
3. Click Save.
Now, you can manage the modem router over the Internet via the website address
displayed behind the Manage this Device via the address field.
Note:
1. If you were warned about the certificate when visiting the web management page remotely, click Trust (or a
similar option) to continue. To avoid this warning, you can download and install the certificate on the modem
router’s web management page at Advanced > System Tools > Administration.
2. The displayed website address uses the modem router’s WAN IP, which is usually a dynamic IP. Please refer to Set
Up a Dynamic DNS Service Account if you want to log in to the router through a domain name.
13. 7. System Log
System Log can help you know what happened to your modem router, facilitating
you to locate the malfunctions. For example when your modem router does not work
properly, you will need to save the system log and send it to the technical support for
troubleshooting.
1. Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2. Click Advanced > System Tools > System Log page.