Download

8
Chapter 2 Connect the Hardware
2. 1. Position Your Modem Router
With the modem router, you can access your network from anywhere within the wireless
network coverage. However, the wireless signal strength and coverage vary depending
on the actual environment of your modem router. Many obstacles may limit the range
of the wireless signal, for example, concrete structures or thick walls.
For your safety and best Wi-Fi performance, please:
• Do Not locate the modem router in the place where it will be exposed to moisture or
excessive heat.
• Keep away from the strong electromagnetic radiation and the device of
electromagnetic sensitive.
• Place the modem router where it can be connected to the various devices as well as
to a power source.
• Make sure the cables and power cord are safely placed out of the way to avoid a
tripping hazard.
• Keep the outside two antennas be outward at about 30 degrees (recommended).
Tips: The modem router can be placed on a shelf or desktop.
2. 2. Connect Your Modem Router
Follow the steps below to connect your modem router.
1. Connect the DSL line and power adapter. The electrical outlet shall be installed
near the device and shall be easily accessible.
Phone Jack Power Adapter
Phone Cable
PHONE
LINE
MODEM
4 Push in to turn on the
modem router.
1 Attach the antennas.
2
DSL Splitter
Phone (Optional)
5 Verify that the following LEDs are on and stable
before continuing with the configuration.
Notes:
Power On OnDSL
Modem Router
LAN2DSL LAN3 LAN4/WAN Power
3
If you don’t need the phone service, just directly
connect the modem router to the phone jack with
the provided phone cable, then follow steps 3 and
4 to complete the hardware connection.
2. We recommends that the outside two antennas be
outward at about 30 degrees.
30° 30°
1. The DSL LED takes about 1 to 2 minutes to stabilize.