Download

Using WPS (Wi-Fi Protected Setup)
Option TWO
WPS is an easier way to extend your host network. You are recommended to use this method if your host router has a WPS button.
The button might look like one of these: . Otherwise, please refer to Option ONE.
Entertainment Adapter
The extender can be used as a wireless adapter to connect any Ethernet-only
device such as a Blu-ray player, game console, DVR, or smart TV to your
Wi-Fi network.
First, connect the extender to your router using Option ONE or Option TWO.
Then connect the extender to your Ethernet-only device via an Ethernet cable.
TP-LINK Tether App
Tether provides a simple, intuitive way to access and manage your extender with
your iOS or Android devices.
Block unwelcome devicesTurn on/off LED
Modify current settingsSetup the extender
Tether
1. Download the Tether app from the App Store or Google Play.
2. Ensure your device is wirelessly connected to the extender or
to the host router.
3. Launch the app and start managing your extended network.
How to
begin?
Scan to download
Smart TV
Game Console
Desktop
Router
Both extended networks share the same SSIDs (network names) and passwords as those of your host networks.
Enjoy!
Ideal extender Placement
Red
Too far away
Blue
Ideal location
Host Network
Host Network
Extended Network
Plug the extender into an electrical outlet about halfway
between your router and the Wi-Fi dead zone. The location
you choose must be within the range of your host network.
Wait until the LED is lit and solid blue. If not, relocate it
closer to the router to achieve better signal quality.
1
2
Relocate
Plug the extender into an electrical outlet
near your router, and wait until the POWER
LED is lit and solid blue.
Power On Connect
Press the WPS button on your router, and then press the button on the extender within 2 minutes.
1
The LED should change
from blinking to a solid state,
indicating a successful WPS
connection.
If not, please use Option ONE.
WPS
Press
2
If you are connecting the extender to a dual-band router but only or LED is on, repeat Step 1
to connect the other band.
For more information about using WPS on your router, please refer to the router manufacturer's user guide.
Some ISP gateways disable the WPS function by default. If the WPS method fails, please refer to Option ONE.
Q3. What should I do if the LED does not change to solid after completing
Option ONE?
Frequently Asked Questions (FAQ)
Q4. How do I restore the extender to its factory default settings?
Q2. What should I do when the LED is on, but only one band is connected?
Q1. What should I do if I cannot access the extender’s web management page?
A. It depends on your router’s capabilities. If you are connecting to a dual-band router but only
2.4GHz or 5GHz LED is on, press the WPS button on the router and on the extender again to
connect the other band.
A1. You may have entered the incorrect Wi-Fi password of your host network during the configuration.
Please log into the extender's web management page to check the password and try again.
A2. If the LED still doesn’t change to solid, please reset the extender and go through the configuration
again.
A1. If your computer is wirelessly connected, make sure that you have connected to the extender’s SSID.
If your computer is connected via an Ethernet cable, please make sure that the connection is stable.
A2. Make sure your computer is set to obtain an IP address and DNS server address automatically.
A3. Verify that http://tplinkrepeater.net is correctly entered in the web browser and press Enter.
A. With the extender powered on, use a pin to press and hold the Reset button until all the LEDs turn on
momentarily, and then release the button.