Download

4
Chapter 1 Get to Know About Your Extender
1. 2. 1. LED Explanation
You can check the extender’s working status by following the LED Explanation table.
Name Status Indication
RE
On/Off
The extender is connected or not connected to the router.
Blinking
WPS connection is in process.
Wireless
On
The extender’s wireless function is on.
Off
The extender’s wireless function is off.
Power
On
The extender is on.
Off
The extender is off.
(Signal Strength)
On
Indicates the Wi-Fi connection between the extender and the
router. More lit LEDs indicate a better signal strength.
Ethernet
On
A device is connected to the Ethernet port
Off No device is connected to the Ethernet port.
1. 2. 2. Port and Button Description
Ports or Buttons Description
(RANGE EXTENDER)
Press the WPS button on your host router, and immediately press the button on
the extender. The RE LED of the extender should change from blinking to solid on,
indicating successful WPS connection.
RESET Button
With the extender powered on, use a pin to press the RESET button until all the LEDs
turn on momentarily. Then release the button.
ETHERNET Port
Connect your Ethernet-only device to the Ethernet port of the extender to join the
Wi-Fi network.