Mounting Guide

Wall Mounting Guide

Wall Mountable Switches

PAGE 1
Wall Mounting Guide Wall Mountable Switches
PAGE 2
1.1 Wall Mounting Preparation Before mounting the switch, you need to prepare the tools below: ǴǴ A screw driver. ǴǴ Two screws which complies to the corresponding standard. For details, see Wall Mounting Specification. 1.2 Wall Mounting Procedure On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the switch on the wall. Note that the switch should be mounted on the wall upright rather than sideways.
PAGE 3
Screw Standard of Minimum Length Screw-Head-to-Wall Wall-Mounting-Holes ANSI B1.1 of Screw Minimum Distance Distance TL-SG1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm TL-SG1008D 4# 8mm 2mm 100mm TL-SG1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm TL-SG105 4#, (5#), 6# 7mm 1.5mm 39mm TL-SG105E 4#, (5#), 6# 7mm 1.5mm 52mm TL-SG105-M2 4#, (5#), 6# 7mm 1.5mm 150mm TL-SG105PE 4#, (5#), 6# 7mm 1.5mm 39mm TL-SG105S 4#, (5#), 6# 7mm 1.5mm 39mm TL-SG108 4#, (5#), 6#, 8# 8.