Specification Sheet
Overview
TL-SG1005LP/TL-SG1005P is a 5 10/100/1000 Mbps ports unmanaged switch that requires no
conguration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply
power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is
transmitted along with data in one single cable allowing you to expand your network to where there are
no power lines or outlets, where you wish to x devices such as APs, IP Cameras or IP Phones, etc.
Power Over Ethernet
Four of the 5 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over
Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE
802.3af/at compliant Powered Devices (PDs).
Overload Arrangement
The switch has the priority function which will help protect the system when the system power is
overloaded. If all PoE PDs power consumption is over the PoE power budget, a priority will be arranged
among the PoE ports, then the system will cut o the power of the lowest-priority port.
Intelligent Power Management
Priority (port 1=port 2=port 3>port 4): This function will help protect the system if the system power
becomes overloaded. Take TL-SG1005P as an example. If port 1, 2 and 4 are consuming 15.4 W
respectively, and an additional PoE device with 19 W is inserted to port 3, the system will cut o the
power of port 4 to compensate for the overload.
The switch is easy to install and use. It requires no conguration and installation. With desktop and
wall-mountable design, outstanding performance and quality, the TP-Link 5-Port Gigabit Desktop
Switch with 4-Port+ PoE is a great selection for expanding your network.
Easy of Use