Quick Installation Guide

ManualsBrandsTP-Link ManualsRoutersTL-WR940N

Modem

Router

Power adapter

Connect to the power socket

Connect to the internet

Connect the power adapter to the

router and turn on the router.

Turn o the modem, and remove the

backup battery if it has one.

Turn on the modem and then wait

about 2 minutes for it to restart.

Connect the modem to the router’s

Internet port via an Ethernet cable.

If your internet connection is through an

Ethernet cable from the wall, instead of

through a modem, connect the Ethernet

cable directly to the router’s Internet port,

and skip Step 1,2 and 3.

Meet all your needs.

Quick Installation Guide

Multi-mode Router

TL-WR940N

Click Next to start the Quick Setup. Select Standard

Wireless Router and follow the step-by-step instructions of

the Quick Setup to complete the initial configuration.

Note: If you are not sure of the WAN Connection Type, please click

Auto-Detect.

http://tplinkwi.net

admin

Launch a web browser, and enter http://tplinkwifi.net or

http://192.168.0.1 in the address bar. Use admin for both

username and password, and then click Login.

Note: If the login window does not appear, please refer to FAQ > Q1.

1. Connect your computer to the router (Wired or Wireless)

Congure the router

Wireless

Wired

Turn o the Wi-Fi on your computer and connect it to the router via

an Ethernet cable.

Connect your device to the router’s

Wi-Fi using the SSID (Network

Name) and Wireless Password

printed on the label at the bottom

of the router.

Wireless Password/PIN:XXXXXXXX

SSID:TP-Link_XXXX

Summary of content (2 pages)

PAGE 1
Quick Installation Guide Multi-mode Router Meet all your needs. TL-WR940N Turn off the modem, and remove the backup battery if it has one. Turn on the modem and then wait about 2 minutes for it to restart. If your internet connection is through an Ethernet cable from the wall, instead of through a modem, connect the Ethernet cable directly to the router’s Internet port, and skip Step 1,2 and 3.
PAGE 2
Access Point Mode Range Extender Mode In Access Point mode, the router transforms your existing wired network to a wireless one. In Range Extender mode, the router boosts the existing wireless coverage in your home. 2. Relocate 1. Configure A. Place the router next to your host router and turn it on. B. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (Network Name) and Wireless Password printed on the label at the bottom of the router.