User Guide

TL-WR720N 150Mbps Wireless N Router
The filtering rules that configured should be similar to the following list:
4.6.4 Wireless Advanced
Choose menu “Wireless→Wireless Advanced”, and then you can configure the advanced
settings of your wireless network.
Figure 4-23 Wireless Advanced
 Transmit Power - Here you can specify the transmit power of Router. You can select
High, Middle or Low which you would like. High is the default setting and is
recommended.
 Beacon Interval - Enter a value between 40-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons. The default value is
100.
 RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the
packet is larger than the specified RTS Threshold size, the router will send RTS frames
to a particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
-39-