Quick Installation Guide
Hardware Connection
1
Conguration for Windows with Setup Wizard
2
7106504990 REV2.0.0
Package Contents
QIG
Resource CD
1
Insert the TP-LINK Resource CD into the CD-ROM drive.
2
Ethernet Cable
TL-WR720N
If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
(To be continued)
Power Adapter
3
5
Computer
4
Cable/DSL Modem
Wall Socket
2
WPS/
RESET
POWER WAN 1 2
Wall Socket
Internet
Connect the WAN port on your Router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.
Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.
1
2
3
Power o your modem.
4
5
Power on the modem and wait for one minute .
6
4
After conrming the hardware connection and the status
of LEDs, please click NEXT to continue.
5
After the connectivity is checked successfully, please click
NEXT.
7
You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXX. Click NEXT
to continue.
8
You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
The default wireless
password, the same
as the PIN code, is
printed on the label
at the bottom of the
Router.
The Router is
pre-encrypted.
3
Select the WAN connection type your ISP provides and click
NEXT. Here we take Dynamic IP for example.
Select your language from the drop-down menu. Click
START and
the Easy Setup Assistant will guide you step
by step to set up the Router.
After conrming the congurations, click NEXT to continue.
You can save these settings in a text file on your
desktop. If you forget the Network Security Key, you
can check the Router Settings.txt.
150Mbps Wireless N Router
MODEL NO. TL-WR720N
Quick Installation Guide
150Mbps Wireless N Router
MODEL NO. TL-WR720N
Quick Installation Guide