User Guide

TL-WR1043ND
450Mbps Wireless N Gigabit Router
4.6.1 Wireless Settings
Choose menu “Wireless
→
Wireless Setting”, and then you can configure the basic settings for
the wireless network on this page.
Figure 4-18 Wireless Settings
 Wireless Network Name (also called SSID) - Enter a value of up to 32 characters. The
same name of SSID (Service Set Identification) must be assigned to all wireless devices in
your network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each router’s MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
 Region - Select your region from the drop-down list. This field specifies the region where the
wireless function of the router can be used. It may be illegal to use the wireless function of
the router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the drop-down list, click the Save button, and then
the Note Dialog will appear. Click OK.
Note Dialog

Note:
Limited by local law regulations, version for North America does not have region selection option.
-35-