User Guide

TL-WR1043ND
450Mbps Wireless N Gigabit Router
 Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
delegate it to the LAN.
 Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
ISP to get more information before you configure them.
 Release Time - The Release Time is the length of time a network user will be allowed to
keep connecting to the Router with the current DHCPv6 Address. Enter the amount of time,
in seconds, that the DHCPv6 address will be "leased". The time range is 1~691200 seconds.
The default value is 86400 seconds.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
 Click the Save button to save your settings.
4.20 System Tools
Figure 4-107 The System Tools menu
Choose menu “System Tools”, and you can see the submenus under the main menu: Time
Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot,
Password, System Log and Statistics. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.20.1 Time Setting
Choose menu “System Tools
→
Time Setting”, and then you can configure the time on the
following screen.
-105-