User Guide

TL-WR1043ND
450Mbps Wireless N Gigabit Router
 Primary DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided by your
ISP.
 Secondary DNS - Enter another DNS IPv6 address in colon-hexadecimal notation provided
by your ISP.
 Click the Renew button to renew the IPv6 parameters from your ISP.
 Click the Release button to release the IPv6 parameters from your ISP.
 If your ISP gives you one or two DNS IPv6 addresses, select Use the following IPv6 DNS
Servers and enter the Primary IPv6 DNS and Secondary IPv6 DNS into the correct fields.
Otherwise, the DNS servers will be assigned from ISP dynamically.
 Primary IPv6 DNS - Enter the DNS IPv6 address in colon-hexadecimal notation provided by
your ISP.
 Secondary IPv6 DNS - Enter another DNS IPv6 address in colon-hexadecimal notation
provided by your ISP.

Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
 Address Autoconfiguration Type – RADVD (Router Advertisement Daemon) and DHCPv6
(Dynamic Host Configuration Protocol for IPv6) Server.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
 Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
delegate it to the LAN.
 Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
ISP to get more infomation before you configure them.
 Release Time - The Release Time is the length of time a network user will be allowed to
keep connecting to the Router with the current DHCPv6 Address. Enter the amount of time,
in seconds, that the DHCPv6 address will be "leased". The time range is 1~691200 seconds.
The default value is 86400 seconds.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
-100-