User Guide

TL-WR1043ND
300Mbps Wireless N Gigabit Router
4.6.3 Wireless MAC Filtering
Choose menu “Wireless
→
Wireless MAC Filtering”, and then you can control the wireless
access by configuring the Wireless MAC Address Filtering function, shown in
Figure 4-22.
Figure 4-22 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enable. The default setting is Disable.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear as shown in
Figure 4-23:
Figure 4-23 Add or Modify Wireless MAC Address Filtering entry

MAC Address - The wireless station's MAC address that you want to filter.
 Status - The status of this entry either Enabled or Disabled.
 Description - A simple description of the wireless station.
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-00-07-8A.
-39-