User Guide

8
Chapter 2
Initial Use
When the Powerline LED turns solid, the pairing process
is done!
Powerline Extender
TL-WPA8630
within 2 minutes
Powerline Adatper
(For demonstration only)
Blinking
On
Blinking
Pair
5. Relocate the new extender to the Wi-Fi “dead” zone. Use the
SSID (network name) and password on the provided Wi-Fi
Info Card to connect to the internet.
Note: A red Powerline LED indicates poor signal strength. Move the extender to
another location.
Now enjoy the internet with the SSID and password printed on
the Wi-Fi Info Card!
2. 2. To Extend the Existing Wireless Network
Extend the existing wireless network by adding a new powerline
extender into the existing powerline network.
Done!
I want to: