User Guide
Table Of Contents
- About This Guide
- Get to Know Your Powerline Extender
- Initial Use
- Configuring via Web Management Interface
19
Chapter 3
Conguring via Web Management Interface
3. 5. 2. Wireless Clients
Follow the steps below to view detailed information of all wireless clients connected to
the extender.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
2. Go to Wireless > Clients page.
3. Now you can view the detailed information, including device name, MAC address,
connected wireless band, and IP address.
Tips: You can also see the wireless details by clicking the wireless clients icon on the Status > Wireless
Clients page.
3. 6. LED Schedules
Automatically turn off LEDs at times when I do not want light in my room.
For example, I want to turn LEDs off from 21:00 to 08:00 every weekday.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in
with the username and password you set for the extender.
2. Go to Wireless > Device Settings > LED Control.
3. Enable LED Status to turn on the extender’s LEDs.
I want to:
How can I do that?