User Guide
Table Of Contents
- About This Guide
- Get to Know Your Powerline Extender
- Initial Use
- Configuring via Web Management Interface
9
Chapter 2
Initial Use
5. Relocate the extender to the Wi-Fi “dead” zone. Use the SSID (network name) and
password on the label at the top of the extender.
Note: A blinking Powerline LED indicates poor signal strength. Move the extender to another location.
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
SSID:TP-LINK_X
XXX
SSID:T
P
-LINK_XXXX_5G
Wireless Pass
w
o
r
d:XXXXXXXX
Now enjoy the internet!
2. 2. To Extend the Existing Wireless Network
Extend the existing wireless network by adding a new powerline extender to the existing
powerline network.
For example, I already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top floor. So I bought a new powerline
extender to extend the wireless network.
1. Plug the new powerline extender into a wall socket near one of the existing powerline
extender.
Done!
I want to:
How can I do that?