User manual

Powerline

Quick Installation Guide

More: To add additional Wi-Fi powerline

device (TL-WPA4220 or others), use the

same setup procedure as the TL-WPA4220.

Wait until the powerline

LED turns on.

TL-WPA4220

TL-PA4010

Applicable to TL-WPA4220 and its multiple-pack kits

Wi-Fi Powerline Extender

7106504934 REV4.0.1

Set your extender(s) settings to your router’s wireless network name and

password.

4 Done. The extender's wireless

network name and password will

now be the same as your router’s.

Note: If Wi-Fi Clone succeeds, relocate the extender to your chosen position. If it fails, use “Customize the

Extender’s Wireless Settings” on the back instead.

Unify Your Wireless Network via Wi-Fi Clone (Optional)

3 Press the Wi-Fi Clone button.

Will blink slowly for

a few seconds

2 Press the WPS button.

WPSWAN LAN

WPS

WAN LAN

Plug and Play

Set Up a New Wireless Network

Select Wi-Fi Name (SSID): TP-LINK_123456

Enter Wi-Fi Password: 12345678

Router

WAN LAN

Enjoy!

1 Plug in your extender next to your router

(with WPS enabled).

Customized Wireless Network Name:

Customized Wireless Password:

Default Wireless Settings

Model No. TL-WPA4220

Wi-Fi Name(SSID):TP-LINK_123456

Wi-Fi Password:12345678

(This QIG uses the powerline adapter TL-PA4010 as an example to work with TL-WPA4220.)

PAGE 1
Quick Installation Guide Wi-Fi Powerline Extender Applicable to TL-WPA4220 and its multiple-pack kits (This QIG uses the powerline adapter TL-PA4010 as an example to work with TL-WPA4220.) 7106504934 REV4.0.1 Plug and Play Wait until the powerline LED turns on. TL-WPA4220 Set Up a New Wireless Network More: To add additional Wi-Fi powerline device (TL-WPA4220 or others), use the same setup procedure as the TL-WPA4220.
PAGE 2
Set Up a Secure Powerline Network Using the Pair Button (Optional) Pairing is used to create a secure powerline network and add additional devices to this secure network. By pairing one additional device at a time, the powerline network can allow up to 16 powerline devices. To create a secure powerline network: 1 Press the Pair button To join an existing secure powerline network: 2 Press the Pair button on the adapter. 3 Done. on the extender.