User Guide

 Group Table
Select: Select the desired entry to delete the corresponding group.
It's
multi-optional.
Group Name: Displays the Group Name here.
Security Model: Displays the Security Model of the group.
Security Level: Displays the Security Level of the group.
Read View: Displays the Read View name in the entry.
Write View: Displays the Write View name in the entry.
Notify View: Displays the Notify View name in the entry.
Operation: Click the Edit button to modify the Views in the entry and click the
Modify button to apply.
Note:
Every Group should contain a Read View. The default Read View is viewDefault.
12.1.4 SNMP User
The User in an SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu SNMP→SNMP Config→SNMP User to load the following page.
Figure 12-6 SNMP User
The following entries are displayed on this screen:
 User Config
User Name: Enter the User Name here.
178