Installation Guide

7106507231 REV3.0.1
5/8-Port Gigabit Easy Smart Switch
1000M (Green)
On: Running at 1000Mbps
Flashing: Transmitting/receiving data
10/100M (Yellow)
On: Running at 10/100Mbps
Flashing: Transmitting/receiving data
Note: For simplicity, we will take TL-SG108E for example throughout this Guide.
Conguration
Using the conguration utility
Using the Web-based GUI
The switch is plug and play. To manage the switch, you can use the
Web-based GUI or the conguration utility.
The utility is provided on the resource CD and only supported on
Windows now.
Double click the switch that you want to congure. Next enter the
username and password (both admin) for it. Then use the utility to
congure the switch.
5.
For more details, see the User Guide and the Easy Smart Conguration
Utility User Guide on the resource CD.
3. Double click the icon on the
desktop, and the utility home page
displays a list of TP-LINK Easy Smart
Switches on the local network.
1. Insert the resource CD into a computer connected to the switch.
2. The resource CD home screen will
appear. If not, double click AutoRun.exe
on the resource CD. Then click Install
Easy Smart Conguration Utility on the
home screen and follow the prompts to
install the program.
Visit the Web-based GUI with the default IP address of the switch
http://192.168.0.1, and log in with admin as both user name and
password. Then congure the switch on the GUI.
2.
Prepare your computer with a static IP address 192.168.0.x ("x" ranges
from 2 to 254), and a subnet mask 255.255.255.0.
1.
Make sure the switch that you want to manage is in the same subnet as
your computer. You can click to congure the switch IP address.
4.
Installation Guide
TL-SG105E/TL-SG108E
LED Explanation
Power
On: Power on
O: Power o
Link/Act
Connection
Ethernet Ports (1-8)
TL-SG108E
PC PC
Router
LAN PortWAN Port
Internet