Installation Guide

8
¾ Ethernet Ports (1-8): Besides the 4 PoE ports, the
TL-SF1008P switch is also equipped with the other four
10/100Mbps Auto-Negotiation RJ45 ports without PoE
function. Once the network devices are connected to these
8 ports through the network cable, the switch will make them
plug and play according to the Auto-MDI/MDIX detection.
The working status can be indicated by the corresponding
LEDs on the front panel.
Note
Make sure the PDs you connected to the switch are complaint
with IEEE 802.3af.