Operation Manual

TL-R4199G SMB Broadband Router User Guide
28
4.4.1 DHCP Settings
Choose menu “DHCP→DHCP Settings”, you can configure the DHCP in the next screen (shown
in Figure 4-15).
The route
r is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.
Figure 4-15
¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
¾ Start IP Address - This field specifies the first address in the IP address pool. The default
address is 192.168.1.100.
¾ End IP Address - This field specifies the end address in the IP address pool. The default
address is 192.168.1.199.
¾ Address Lease Time - This is the amount of time in which a network user will be allowed
connection to the router with their current dynamic IP address. Enter the amount of time (in
minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.
¾ Default Gateway - Suggest inputting the IP address of the LAN port of the router, default
value is 192.168.1.1. (Optional)
¾ Default Domain - Input the domain name of your network. (Optional)
¾ Primary DNS - Input the DNS IP address provided by your ISP. You can consult your ISP
for it. (Optional)
¾ Secondary DNS - Input the IP address of another DNS server if your ISP provides two DNS
servers. (Optional)
)
Note: