TF-3239DL 10/100Mbps PCI Network Adapter Rev: 1.1.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 10/100Mbps PCI Network Adapter Model No.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Overview of the product...................................................................................................... 2 1.2 Features ......................................................................................................................
TF-3239DL 10/100Mbps PCI Network Adapter Package Contents The following contents should be found in your box: ¾ One TF-3239DL 10/100Mbps PCI Network Adapter ¾ Quick Installation Guide ¾ One Resource CD for TF-3239DL, including: • Drivers • User Guide • Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the listed items is damaged or missing, please contact your distributor.
TF-3239DL 10/100Mbps PCI Network Adapter Chapter 1. Introduction 1.1 Overview of the product The TF-3239DL is highly integrated and cost-effective single-chip Fast Ethernet Adapter that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-TX specifications and IEEE 802.3x Full Duplex Flow Control.
TF-3239DL 10/100Mbps PCI Network Adapter ¾ Supports Auto-Negotiation function ¾ Auto-setups IRQ and I/O address ¾ Contains two large (2Kbyte) independent receive and transmit FIFOs ¾ One STP/UTP connector for 10Mbps or 100Mbps network Speed ¾ Provides diagnostic software and one LED to indicate network Link/activity ¾ Supports Drivers for Linux-2.4.x, Windows 7 (32bit / 64bit), Windows Vista (32bit / 64bit), Windows 2000 and Windows XP 1.
TF-3239DL 10/100Mbps PCI Network Adapter Chapter 2. Installation Guide 2.1 Hardware Installation To install the adapter, please follow these steps listed below: 1. Turn off your computer and unplug the power cord and all cables. 2. Remove your computer’s case cover. 3. Locate an available PCI slot. 4. Remove the screw that secures the back plate (the small piece of metal that covers the opening for PCI card on the back panel of your computer), then remove the back plate. 5.
TF-3239DL 10/100Mbps PCI Network Adapter Figure 2-2 Found New Hardware Wizard in Windows Vista 2.2 Software Installation The section will guide you through the installation procedures for Windows XP, Windows 7, and Windows Vista. Please carefully follow the steps. 2.2.1 For Windows XP 1. Insert the TP-LINK Resource CD into the CD-ROM drive. 2. Right-click the icon My Computer on the desktop, and then click Manage.
TF-3239DL 10/100Mbps PCI Network Adapter Figure 2-3 3. The Computer Management screen will appear as shown in Figure 2-4. Click Device Manager, and then you will see the various options on the right. Click Network adapters, and then from the drop-down list please find the new network adapter Realtek RTL 8139/810x Family Fast Ethernet NIC you have installed. Right-click it, and then select Update Driver….
TF-3239DL 4. 10/100Mbps PCI Network Adapter The Hardware Update Wizard window will show up as shown in Figure 2-5. Select Install from a list or specific location [Advanced]，and then click Next. Figure 2-5 5. Select Don’t search. I will choose the driver to install, and then click Next.
TF-3239DL 6. Click Have Disk…. Figure 2-7 7. Click Browse….
TF-3239DL 8. 10/100Mbps PCI Network Adapter Find the right product model （TF-3239DL）and operation system (Windows XP) in the resource CD directory and choose the .inf file, and then click Open. Figure 2-9 9. Back to the Install From Disk screen, click OK.
TF-3239DL 10/100Mbps PCI Network Adapter 10. Click Next. Figure 2-11 11. The Hardware Installation screen will pop up as shown in Figure 2-12; select Continue Anyway.
TF-3239DL 12. Wait a few seconds for the installation. Figure 2-13 13. Click Finish to complete the installation.
TF-3239DL 10/100Mbps PCI Network Adapter 2.2.2 For Windows 7 1. Insert the TP-LINK Resource CD into the CD-ROM drive. 2. Right-click the icon Computer on the desktop, and then click Manage. Figure 2-15 3. The Computer Management screen will appear as shown in Figure 2-16. Click Device Manager, and then you will see the various options on the right.
TF-3239DL 4. 10/100Mbps PCI Network Adapter The next screen will appear as shown in Figure 2-17. Select Browse my computer for driver software. Figure 2-17 5. Select Let me pick from a list of device drivers on my computer, and then click Next.
TF-3239DL 6. 10/100Mbps PCI Network Adapter Click Have Disk… in the screen as shown in Figure 2-19. Figure 2-19 7. Click Browse… in the Install From Disk window as shown in Figure 2-20. Figure 2-20 8. Find the right product model (TF-3239DL) and operation system (Windows 7) in the resource CD directory and choose the .inf file, and then click Open.
TF-3239DL 10/100Mbps PCI Network Adapter Figure 2-21 9. Back to the Install From Disk window as shown in Figure 2-22, click OK. Figure 2-22 10. Click Yes in the Update Driver Warning window to continue the installation.
TF-3239DL 10/100Mbps PCI Network Adapter 11. Click Next in the next screen as shown in Figure 2-24. Figure 2-24 12. Select Install this driver software anyway in the Windows Security window as shown in Figure 2-25.
TF-3239DL 13. Wait a few seconds for the installation. Figure 2-26 14. Click Close to complete the installation.
TF-3239DL 10/100Mbps PCI Network Adapter 15. Click Yes in the System Settings Change window (as shown in Figure 2-28) to restart the computer, so that the installation will take effect. Figure 2-28 2.2.3 For Windows Vista 1. Insert the TP-LINK Resource CD into the CD-ROM drive. 2. Right-click the icon Computer on the desktop, and then click Manage. Figure 2-29 3. The Computer Management screen will appear as shown in Figure 2-30.
TF-3239DL 10/100Mbps PCI Network Adapter Figure 2-30 4. The next screen will appear as shown in Figure 2-31. Select Browse my computer for driver software.
TF-3239DL 5. 10/100Mbps PCI Network Adapter Select Let me pick from a list of device drivers on my computer, and then click Next. Figure 2-32 6. Click Have Disk… in the screen as shown in Figure 2-33.
TF-3239DL 7. 10/100Mbps PCI Network Adapter Click Browse… in the Install From Disk window as shown in Figure 2-34. Figure 2-34 8. Find the right product model (TF-3239DL) and operation system (Windows Vista) in the resource CD directory and choose the .inf file, and then click Open.
TF-3239DL 9. 10/100Mbps PCI Network Adapter Back to the Install From Disk window as shown in Figure 2-36, click OK. Figure 2-36 10. Click Yes in the Update Driver Warning window to continue the installation.
TF-3239DL 10/100Mbps PCI Network Adapter 11. Click Next in the next screen as shown in Figure 2-24. Figure 2-38 12. Select Install this driver software anyway in the Windows Security window as shown in Figure 2-39.
TF-3239DL 13. Wait a few seconds for the installation. Figure 2-40 14. Click Close to complete the installation.
TF-3239DL 10/100Mbps PCI Network Adapter 15. Click Yes in the System Settings Change window (as shown in Figure 2-42) to restart the computer, so that the installation will take effect.
TF-3239DL 10/100Mbps PCI Network Adapter Appendix A: Specifications Normal Interface 32-bit PCI interface Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Software Drivers for Linux-2.4.
TF-3239DL 10/100Mbps PCI Network Adapter Appendix B: Troubleshooting 1. What should I do if PC cannot find the new hardware? Check to see if the network adapter is inserted in the PCI slot properly; otherwise, please reinsert the adapter. If the problem remains, please try to change another PCI slot. 2. What should I do if PC cannot identify the new hardware? If you couldn’t find the network adapter you’ve installed by going to “(My) Computer > Manager > Device Manager > Network Adapter >...
