FTP Server Application Guide Rev: 2.0.
Contents Overview ............................................................................................................................................................. 1 How to access FTP Server ................................................................................................................................... 2 LAN Access.......................................
Overview FTP (File Transfer Protocol) server feature allows you to share a USB storage device that’s connected to the modem router, to users in the local or public network. Typical Topology ) Note: (1) USB Storage Device stands for FTP Server in this topology. Some USB storage devices may require using the external power. (2) Local PC here means the PC that is in the same subnet with the FTP Server (Modem Router).
through the Internet if needed to access the FTP server, which is called WAN Access. (4) Here in this guide, we take the configuration procedures of TD-W8990 for example. How to access FTP Server LAN Access The modem router’s FTP Server function for Local PC is enabled by default, when the storage device is plugged into its USB port. Please follow the steps to access the FTP server. • For Windows Users: Windows XP: • Go to Start > My Computer • Input ftp://192.168.1.
• Input the default username and password: admin, admin • Click Log On -3
• For Mac OS X Users: • On the top tray, go to Go > Connect to Server • Input Server Address ftp://192.168.1.
• For Linux Users: • On the top tray, go to Places > Connect to Server • Choose Service type FTP(with login) • Input Server 192.168.1.
• Select Connect as user • Input the default username and password: admin, admin • • Click OK For third party FTP client software users (Here we take CuteFTP Professional 8 for example.
• Open the CuteFTP • Go to File >New >FTP Site or press Ctrl+N to open a new Site properties. • Set the dialog box as shown in the figure and click Connect. Note: The default user name/password of the Super User is admin/admin. ) Note: To set up different accounts with their own access rights, please log onto the web-based management page and set it on USB Settings > FTP Server and USB Settings > User Accounts.
WAN Access For WAN access to FTP server, please configure the modem router first. Log onto the web-based management page, then go to USB Settings > FTP Server and follow the steps in the figure below. Now your modem router has been configured. The IP behind Internet Address would be used to access the FTP server. Here we take 218.18.0.163 as an example. Please follow the steps below to access the FTP server.
• For Windows Users: Windows XP: • Go to Start > My Computer • Input ftp://218.18.0.163 in the address field • Press Enter Windows Vista/7: • Go to Start > Computer • Input ftp://218.18.0.163 in the address field • Click Go or press Enter Windows 8: • Move your mouse to the lower right corner and you will see Search icon in the Popups. Click it and search computer • Go to computer page, and input ftp://218.18.0.
• Input the default username and password: admin, admin • Click Log On -10
• For Mac OS X Users: • On the top tray, go to Go > Connect to Server • Input Server Address ftp://218.18.0.
• For Linux Users: • On the top tray, go to Places > Connect to Server • Choose Service type FTP(with login) • Input Server 218.18.0.
• For third party FTP client software users (Here we take CuteFTP Professional 8 for example.) • Open the CuteFTP • Go to File >New >FTP Site or press Ctrl+N to open a new Site properties. • Set the dialog box as shown in the figure and click Connect. Note: The default user name/password of the Super User is admin/admin.
Extended Application How to create a user account Log onto the web-based management page, then go to USB Settings > User Accounts and follow the steps in the figure below.
) Note: (1) The status of the new user is disabled by default. You need to click Enable in the Action column of user account table to enable folders access. (2) User name “admin*” is a “Super User” with full-access permission. Its action that could access all active volumes and shared folders is enabled by default. (3) The default user name/password of the Super User is admin/admin. (4) Currently, there is quantitative restriction of FTP Server user.
How to add a shared folder Log onto the web-based management page, then go to USB Settings ->FTP Server and follow the steps in the figures below.
-17
-18
-19
) Note: (1) The default shared folder volume share entire partition of the storage device plugged into the USB port. (2) You can share up to 10 folders simultaneously. If you want to share a new folder when the number has reached 10, you can delete an existing share folder and then add a new one.
¾ Set Access Authorization There are three access authorization levels: full-access, read-only and no-access. The full-access user (i.e. super user) has full-access permission to add, delete and modify files on the FTP server. The read-only user just has file-reading permission. And the no-access user is unable to access the FTP server. If you want to set access authorization for a user (e.g. user1), please follow the steps illustrated in the figures below.
-22
Troubleshooting What can I do if I forget the password to access the FTP server? Log onto the web-based management page, and then go to USB Settings ->User Accounts, please configure it according to the steps in the following figure.
