Quick Installation Guide

4
Enter the modem router’s
default username and
password: admin/admin,
then click OK.
Note
If you forget the password, please refer to T2 in Troubleshooting.
Click Quick Setup and then
click Next to enter Operation
Mode page. Select Operation
Mode and then click Next to
continue. Here we use
A
DSL
Modem Router Mode as an
example.
Select Connection Type
and then click Next to
continue. Here we use
PPPoE as an example.
Note
If you don’t have the VPI, VCI and Connection Type information, please
contact your ISP for this information.
Note
For 3G Router Mode or Wireless Router Mode configuration, please refe
r
to 3.2 Quick Installation Guide on User Guide. You can get the User Guide
on Resource CD or download from our website www.tp-link.com.
Enter VPI/VCI values
provided by your ISP. Click
Next to continue.