Print Server Application Guide TD‐W8968 TD‐W8970 / TD‐W8970B TD‐W8980 / TD‐W8980B Rev: 1.0.
Contents Overview..............................................................................................................................................................................................1 Installation for Windows OS .......................................................................................................................................................
Overview Print server is a function embedded in your modem router. It allows you to share your printer with computers that are connected to the modem router. Typical Topology Here in this guide, we take the configuration procedures of TD-W8968 for example.
Installation for Windows OS Insert the modem router’s Resource CD into the 1. CD-ROM drive. 3. Click START. 2. Select your modem router model and click Printer Sharing Setup. 4. Connect your computer and printer to the modem router step by step as instructed. Click NEXT.
5. Check the LED lights and click NEXT. 7. Please wait a moment for the installation preparation. 6. Click NEXT to start installing the printer share software. 8. Click Next and go on to install the TP-LINK USB Printer Controller.
9. Click Change… to select another destination folder, or leave it default and click Next. 11. Click Finish to complete and exit the InstallShield Wizard. 10. Please wait a while for the installation process.
When the installation is completed, the TP-LINK USB Printer Controller will pop up, with whose help you can print documents via the modem router now. ) Note: In your LAN, each computer that wants to share the print server should also install the TP-LINK USB Printer Controller. Please follow the previous steps to configure other computers in your LAN.
Application for Windows OS TP-LINK USB Printer Controller is used to operate the USB Printer on your own computer. After successful installation, the icon will appear on the desktop of your computer. How to launch/exit the TP-LINK USB Printer Controller ¾ To launch the USB Printer Controller, double-click the icon on your desktop.
Step 1: Highlight the printer you want to set as auto-connect printer. Step 2: Click the inverse triangle mark on the Auto-Connect for printing tab to pull down the list, where you can select Set Auto-Connect Printer. Step 3: Tick the name of the printer you would like to set as auto-connect printer, and then click Apply.
After successful setting, you will see the printer marked as Auto-Connect Printer. Then you can execute your printing task freely. If you want to disable your printer's auto-connect function, you can delete it. Method One: Select Delete Auto-Connect Printer from the drop-down list of the Auto-Connect for Printing tab. Method Two: 1. Go to Tools->Auto-Connect Printer List.
2. Highlight your auto-connect printer and then click Delete. How to scan There are two methods available to realize the scanning function. Method One: Network Scanner Step 1: Highlight your scanner or MFP.
Step 2: Click Tools and then select Network Scanner. Step 3: Select the type of picture you want to scan, and then click Scan.
Step 4: Name the image set, select the file format, and choose the file destination by clicking Browse… or leave it default. Then click Next. Step 5: Wait a while for the scan process.
Step 6: When it is 100% processed and saved, please click Close to complete it. Then go to the location you’ve chosen in the previous Step 4 and find your picture scanned.
Step 2: Click the tab Connect for Scanning. Successfully set and ready for scanning, it will display Manually Connected by…, when you can start your scanning task. Step 3: After finishing your scanning task, please do remember to click the tab Disconnect to release the scanner or MFP.
Step 1: Highlight the scanner or MFP you want to share for printing or scanning. Step 2: Click the tab Request to Connect. Step 3: You will be prompted a window that transmits your request. Please wait patiently for the reply.
Step 4: If the other user Accepts your request to connect, please click Exit to start your printing or scanning task. Other functions/ settings ¾ Configuration Go to Tools-> Configuration, tick the option Automatically execute when logging on Windows, and then click OK. With this setting, the TP-LINK USB Printer Controller will run automatically every time you log on your computer.
¾ Configure Server Highlight the modem router and click the tab Configure Server; the login window of the modem router will pop up. You need to enter the user name and password (both are admin by default.) to log in the web-based management page of the modem router.
Troubleshooting 1. Where can I find the printer compatibility list? Go to our website www.tp-link.com, then go to Products ->ADSL, find your product model and go to Download -> Document -> Printer Compatibility List.
2. Where can I find the relevant software for installation? Go to our website www.tp-link.com, then go to Products ->ADSL, find your product model and go to Download ->Software -> Utility. Then next web page will be loaded, where you can select the USB Printer Controller_Utility and download it.
-35-
3. How to manage the print server on the web-based management page? The modem router’s Print Server function is enabled by default. To disable the function, you need to log onto the Web-based management page. See the following instructions (Here takes that in Windows 7 for example): 1） Make sure you have a PC or notebook connected to the modem router, either via wireless or wired connection.
4） Go to USB Settings -> Print Server. Click Stop to disable the function. Click Start to enable the function.
