User Guide

TD-W8961ND

300Mbps Wireless N ADSL2+ Modem Router User Guide

have this function working properly, please run on router mode only, disable the DHCP server

on the LAN port, and make sure the routing table has the correct routing entry.

Figure 4-13

• DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN

side.



Note:

If you select Disabled, the DHCP function will not take effect.

4.3.3 Wireless

Choose “Interface Setup→Wireless” menu, and you will see the Wireless screen (shown in

Figure 4-14 ). Please configure the parameters for wireless according to the descriptions below.