User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
4.6.1 Basic
Choose menu “Guest Network”“Basic”, and you will see the screen as shown in Figure 4-98.
This feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
Figure 4-98
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
 Guest SSID: The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network.
 Authentication Type: Select the Authentication Type from the drop-down list.
 Encryption: You can select either Auto, or AES+TKIP.
 Wireless Password: Here display the default wireless password, you can click Click here to
display to see the default wireless password, and you can also enter ASCII characters
between 8 and 63 characters or 8 to 64 Hexadecimal characters to create a new password.
 Group Key Update Period: Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 Allow Guests to access my Local Network: The guests have access to your Local
Network, but can not login the modem router’s web management interface.
 Guest Network Isolation: This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
 Guest Network Bandwidth Control: With this function, you can configure the Upstream
Bandwidth and Downstream Bandwidth for guest network.
Click Save/Apply to save your settings.
84