User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 4-68

4.5.2.1 WPS Setup

This

section will guide you to add a new wireless device to an existing network quickly by WPS (or

called QSS) method.



Note:

1) This feature is available only when OPEN, WPA-PSK, WPA2-PSK or Mixed WPA2/WPA-PSK

mode is configured.

2) To build a successful connection by WPS, you should also do the corresponding configuration

of the new device for WPS function meanwhile.

I. By PBC

If the wireless adapter supports WPS and the Push Button Configuration (PBC) method, you can

add it to the network by PBC with the following two methods. Click Push-Button, you will see the

screen as shown below.