User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide

addr

ess. After the dynamic IPv6 address has expired, the user will be automatically

assigned a new dynamic IPv6 address. The default is 24 hours.

For RADVD:

1) If Randomly Generate is selected, it doesn’t need to be configured.

2) If Statically Configure is selected, please complete the following parameters.

 Prefix: Enter a value for the site prefix.

Click Save/Apply to make the configuration take effect.

4.4.5 NAT

NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP

address for multiple computers on your LAN (Local Area Network).



Note:

When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT for the

type of IPoA and IPoE connection (4.4.2 WAN Service), you will see the NAT menu in the

Web-based Utility (shown in Figure 4-24).

Figure 4-24

Choose “Advanced Setup”“NAT”, there are three submenus under the main menu: Virtual

Servers, Port Triggering, DMZ Host and ALG. Click any of them, and you will be able to

configure the corresponding function.