User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide

Note:
If you select the Enable NAT checkbox, the NAT menu will be added to the Web-based Utility. We
will describe the detailed configuration in 4.4.5
NAT.
6. Select a preferred WAN interface as the system default gateway and click Next.
Figure 4-17
7. Configure the DNS Server Addresses on the screen as follows.
Figure 4-18

Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
8. On the next screen (as shown Figure 4-19) you will see the detailed settings you’ve made.
Please click the Appl
y/Save button to save these settings.
25