User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
2)
If you are unwilling to configure WAN Service now, you can click the Skip WAN button. Then
you can configure WAN service referring to 4.4.1 Layer2 Interface
.
4. If ADSL WAN is choosen, please select your Country and ISP from the drop-down list. Select
WAN Link Type provided by your ISP and enter the related parameters, and then click Next.
Here we use PPPoE as an example.
Figure 3-7

Note:
If your country or ISP is not listed, please select Other. Then you can manually enter the VPI/VCI
values and select WAN Link Type provided by your ISP.
If Ethernet WAN is choosen, please select WAN Link Type provided by your ISP and enter the
related parameters, then click Next. Here we use PPPoE as an example.
Figure 3-8
12