User Guide

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide
2)
Use the Factory Default RESET button: With the Router powered on, use a pin to press and
hold the RESET button for at least 5 seconds. And the Router will reboot to its factory default
settings.
 WPS: The switch for the WPS function. For details, please refer to 4.5.2.1 WPS Setup
 ON/OFF: The switch for the power.
 POWER: The Power plug is where you will connect the power adapter.
 Wireless Antennas: To receive and transmit the wireless data.
6