User Guide

TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
14
Figure 3-7
2) Select Static IP Address in Figure 3-6, the next screen will appear as shown in
Figure 3-8.Configure the following options provided by your ISP: VPI, VCI, IP
Address, Subnet Mask, ISP Gateway and Connection Type. Then click NEXT.
Figure 3-8
¾ DNS Relay: If you want to disable this feature, you just need to set both Primary and
secondary DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server
IP to 192.168.1.1 on their Computer. If not, the device will perform as no DNS relay.
¾ Primary DNS Server: Type in your preferred DNS server.
¾ Secondary DNS Server: Type in your preferred DNS server.