Installation Note Please run the CD first, and the CD will guide you step-by-step to connect and configure the device. If there are troubles in running CD, please follow the instructions below. Note Please use only wired network connections to configure the Modem Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem. Connect your computer to the port labeled “LAN 1~4” on the Modem Router with an Ethernet cable.
Connect your telephone to the port labeled “PHONE 1/2” on the Modem Router with a telephone line. Connect your USB device to the USB port labeled “USB 1/2” on the Modem Router. Note 1. If you want to share files or use the USB Voice Mail function, please plug an external USB hard drive/USB flash disk into the USB port. To use the printer function, please connect a USB printer to the USB port. 2.
Note To configure the device, TP-LINK strongly recommends that Windows users run the setup CD, Mac OS\Linux\Windows\Android\iOS user who can not run the mini CD, please refer to Appendix to run the web-based Quick Setup Wizard. Insert the provided Resource CD into your CD-ROM drive. The Setup Wizard will automatically pop up on your computer’s screen.
Then the configuration wizard will pop up and show you how to connect your devices. After that, the Easy Setup Assistant will start. Click NEXT, and then follow the step-by-step instructions When it comes to Setup the SIP Account for VoIP, you need to enter the SIP account information provided by your ISP.
Note The USB device can only be configured through the Easy Setup Assistant. After that, configure files necessary for USB Voice Mail function can be found in your USB disk. For advanced settngs, please refer to 4.7.8 USB Voice Mail on User Guide. After the configuration has been completed, please skip to Step 3 “Testing the Internet Connection”. The basic settings for your Modem Router are completed.
Application Guide for USB Features Local Storage Sharing Local Storage Sharing allows you to share your USB drive or HDD with other computers, tablets or smart phones that are connected to the Modem Router. You can create multiple shares and control the permission by setting different accounts. Please refer to 4.8.3 Storage Sharing on User Guide. Remote Storage Sharing Remote Storage Sharing turns your USB drive or HDD into a FTP server, which enables your access anywhere you have an Internet connection.
Troubleshooting T1. How do I restore my Modem Router’s configuration to its factory default settings? With the Modem Router powered on, press and hold the RESET button on the front panel for 8 to 10 seconds before releasing it. Press it for 8 to 10 seconds Note Once the Modem Router is reset, the current configuration settings will be lost and you will need to re-configure the router. T2.
For Windows 7 OS Go to Start > Settings > Control Panel, and then you will see the following page.
Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 9
For Windows XP OS Go to Start > Control Panel, you will then see the following page.
Double-click Internet Protocol (TCP/IP) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 11
Click OK 12
For Windows Vista OS Go to Start > Settings > Control Panel, and then you will see the following page.
ࡇᇙƽ Double-click Internet Protocol Version 4 (TCP/IPv4) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 14
2) Configure your IE browser. Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Select Never dial a connection Click OK Now, try to log on to the Web-based configuration page again after the above settings have been configured. If you still cannot access the configuration page, please restore your Modem Router’s factory default settings and reconfigure your Modem Router following the instructions of this QIG.
T4. What can I do if I cannot access the Internet? 1) Check to see if all the connectors are connected well, including the telephone line, Ethernet cables and power adapter. 2) Check to see if you can log on to the web management page of the Modem Modem Router. If you can, try the following steps. If you cannot, please set your computer referring to T3 then try to see if you can access the Internet. If the problem persists, please go to the next step.
Appendix Login Open your web browser and type 192.168.1.1 in the address bar and press Enter A dialog box will prompt you for the User name and Password. Enter the default values and click OK. User name: admin Password: admin Click OK Note If the dialog box does not pop up, please refer to T3 in the Troubleshooting guide and T2 will give you some help if you forget the password. The web management page will display after a successful login.
Internet Parameters Configuration This page will then display. Click Next Enter the VPI and VCI values given by your ISP Click Next Choose the WAN Type given by your ISP. If PPPoE/PPPoA is selected, please proceed to A; If Dynamic IP is selected, please skip to B; If Static IP/IPoA is selectedLjplease skip to C; If Bridge Mode is selected, please skip to D. Click Next Note If you did not get the VPI, VCI and WAN Type information, please contact your ISP for this information.
Note If you are using the modem on a new DSL line and have not completed your DSL provider’s online registration, you may be using a generic username and password. When registration is completed, you will need to update the username and password if you have created a new one. B. Configuration for Dynamic IP This type doesn't need to be configured. C. Configuration for Static IP/IPoA This page will then display. Enter the Static IP information provided by your ISP manually Click Next D.
Note Disable Security is not recommended. After completing the above configuration, please proceed to Configuration. Voice Settings Voice Settings Configuration This page will then display. Enter a profile name to identify this account Enter the Voice information provided by your ISP manually Note For advanced settings, check the box before More Setup. After completing the above configuration, please proceed to Complete. Quick Setup Quick Setup Complete Save page will be displayed.
Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/download For all other technical support, please contact us by using the following details: Australia & New Zealand Global Tel: +86 755 26504400 Tel: AU 1300 87 5465 E-mail: support@tp-link.com NZ 0800 87 5465 Service time: 24hrs, 7 days a week E-mail: support@tp-link.com.
