User Guide

6
3. Test Your Sensor
a. Open and close the sensor to test it in your
preferred location.
b. Check the Event Log on the Tapo app to
conrm the open/closed status.
4. Mount Your Sensor
a. Stick the included adhesives
on the sensor and magnet.
b. Choose where you’d like to install the sensor (but don’t
attach it yet). Place the magnet near the edge of the door
or window that moves.
Notes:
· Leave at least 0.39 inches (10 mm) of space so you can open the battery compartment.
· Installation height should not be higher than 6.56 ft (2 m).
x2
x1
≥ 0.39 inches (10 mm)