User Manual

4
Remove Protective Film
3
Remove Protective Strip
2
• To ensure a better user experience, make sure the area is with good Wi-Fi signals.
• Do not place it in direct sunlight. Ensure the area around the dock is free of clutter to
improve docking performance.
• To prevent the risk of your robot vacuum falling downstairs, ensure that the dock is
placed at least 1.2m (4 ft) away from stairs.
• Always keep the dock powered on, otherwise the robot vacuum will not automatically
return. And do not move the dock frequently.
• Place a waterproof pad to prevent the mop from wetting the oor when the robot
vacuum is being charged.
1. Remove the bottom cover of the dock, connect the
power cord to the dock, and then replace the cover.
2. Place the dock on a level surface, at against a wall,
without obstacles within 1.5m (4.9ft) in front and
0.5m (1.6ft) on left and right.
Before use, remove the protective strips on
both sides of the front bumper.
Remove the protective lm on the front bumper.
Notes
1.5m (4.9ft)
Position the Dock
1
0.5m (1.6ft)
0.5m (1.6ft)
1 2
Remove the protective lm on the front bumper.