User Manual

8
Mopping
7
• Vacuum oors at least 3 times before the rst mopping cycle.
• The ability to cross obstacles is reduced when mopping.
• It is recommended to wash the mop cloth after each use.
2. Remove the rubber plug
and add up to 300ml of
water to the water tank.
• Fill with cool/room temperature water only.
Be careful not to wet the metal contacts.
• Use only cleaning agents specied by Tapo.
Others may corrode the water tank.
1. Take out the dustbin
and water tank.
3. Install the washable
mop cloth.
4. Install the mop cloth
mount.
5. Re-install the dustbin
and water tank.
2. Empty the water tank.
1. Remove the mop cloth mount.
3. Remove the washable
mop cloth.
5. Sun dry mop cloth and
mop cloth mount.
4. Clean the mop cloth.
OFF
ON
OFF ON